Cómo usar Mouse tester
- 1
Pick a test
Choose Buttons & wheel, Polling rate, DPI or Sensitivity from the tabs at the top of the test panel.
- 2
Click and scroll in the box
Press every button, back and forward included, and roll the wheel. Tested buttons change colour on the drawing and their press counts go up.
- 3
Move fast for the polling rate
Sweep the mouse in quick circles over the polling box; the average and peak rate settle within a few seconds.
- 4
Slide along a card for DPI
Press Start run, slide the mouse along a bank card or ruler and click at the far end. Do three runs or more and read the average.
- 5
Turn it into cm/360
Enter your DPI and in-game sensitivity to see eDPI, the distance for a full turn, and the sensitivity to use after changing DPI.
Límites y Pro
Free without limits: five standard buttons plus any extra the browser reports, the wheel in all four directions, polling rate from the last 160,000 movement reports, an average of up to 10 DPI runs, and four games or any custom yaw in the calculator.
Acerca de Mouse tester
This mouse tester checks the hardware behind your pointer in four tabs. The button test lights up left, right, middle, back and forward on a drawing of a mouse, counts every press and times each one against the same button's previous press. Two presses closer than the threshold you choose (80 ms by default) are flagged as double-click chatter, the usual sign of a worn switch that turns one click into two. The same box records the scroll wheel: steps up, down and sideways, whether the browser reports them in pixels, lines or pages, and wrong-way jumps that happen while you scroll steadily in one direction.
The polling rate test timestamps every movement report the browser receives, from raw pointer updates or coalesced events where the browser has them, and shows the average and peak rate with a live chart. Only time spent moving counts, so pauses don't drag the number down.
The DPI analyzer locks the pointer and adds up the counts the sensor sends while you slide the mouse over a known distance, such as the 85.6 mm long edge of a bank card. Chrome and Edge are asked for raw counts that skip your pointer speed and acceleration settings; when a browser can't give them, the page warns you. Averaging several runs gives a figure to compare with the DPI on the box or in the mouse's own software, which is often a few percent off.
The sensitivity calculator turns DPI and in-game sensitivity into eDPI and centimetres per 360° turn for Counter-Strike 2, Team Fortress 2, Half-Life 2, Quake III Arena or any game whose yaw you know.
A web page only sees what the mouse driver passes on, so buttons remapped to keyboard shortcuts in vendor software show up as keys, not clicks.
Privacidad
Clicks, wheel steps and pointer movement are measured by this page in your browser and never sent anywhere, so nothing about your mouse or how you use it leaves your device. Only your choices, such as the chatter threshold, reference distance and game values, are remembered in this browser's local storage.
Características
Buttons and chatter
Five buttons with press counts, repeat timing and double-click chatter warnings.
Polling rate
Average and peak report rate in Hz with a live chart.
DPI analyzer
Counts over a card or ruler, averaged across runs.
eDPI and cm/360
For Source and Quake games or any yaw you enter.